Air3S Gimbal calibration error(Error Correction)

geekfix

Air3S Gimbal calibration error(Error Correction)

Please confirm if your computer has installed the DJI driver software DJI Assistant 2


Pay attention to the prompts on the computer screen. For some models, when calibrating to the final step, it is necessary to stand the drone upright!


NEO
AVATA
AVATA2
The above three models only require rough calibration,Then calibrate in the settings of the remote control.No more errors reported after calibration.

Neo 2
Flip
MINI 4PRO
MINI 5PRO
AIR 3
MAVIC 3E
MAVIC 3T
MAVIC 3M
MAVIC 3PRO
Mavic 3
Mavic 3Classic
MAVIC 4PRO
Matrice 4 Thermal
Matrice 4 Enterprise
Matrice 3 Enterprise Dock
Matrice 3 Thermal Dock
OSMO POCKET 3
.....................................
The above models can be calibrated directly without any errors.

More models are being continuously updated
V2.2 will be released on May 12th, with new support for Mavic 3 and Mavic 3Classic




Please note that older Drones, such as:
Air2
Air2S
mini
mini2
mini3
mini3pro
Mini4K
..........etc, please use:<GeekFix-gimbal-calibration_old model_V1.0>