|
|
GeekFix Hub_SN_ESC_Test_V1.1
Please confirm if your computer has installed the DJI driver software DJI Assistant 2
Download on computer, run on computer, Windows 10 system
You need to upgrade your GeekFix_ID username to the VIP user group before logging in will be available this software
GeekFix Hub_SN_ESC_Test_V1.0.rar
(2.31 MB, Downloads: 155)
Link testing:
This function can check the link communication of various modules of the aircraft, display faulty components, improve the efficiency of your maintenance, and assist you in fault diagnosis. (In rare cases, there may be misjudgments, please refer to the actual situation.)
Visual/TOF serial number query:
This function can query the visual serial number and TOF serial number of the aircraft, and determine whether each visual camera is connected by successfully obtaining the serial number. To some extent, it helps you locate damaged visual cameras.
Frequency testing:
This function is applied to aircraft that have been flooded or blown up. The battery button cannot put it into the frequency matching state, but you want to quickly determine whether the cause of the frequency mismatch is due to damage to the ESC, cable or core board. At this time, you can click it, and it will disconnect the battery, ESC, and directly communicate with the core board to enter the frequency matching state. If it successfully enters the frequency matching state, it may be due to damage to the cable, ESC or battery, otherwise it is a core board failure.
Electric tuning data repair:
This function is commonly used for some drones in the Mavic3 series. If the bottom shell deforms after the explosion, causing a short circuit in the motor wire, the system will enter a protective state and prompt for the repair of electrical adjustment abnormalities. If the error persists after clicking, it is a hardware malfunction.
Obstacle avoidance ineffective repair:
This function is used for repairing common issues with the AIR3 AIR3S MINI4PRO after some aircraft maintenance, such as ineffective takeoff obstacle avoidance, mainly manifested as the inability to turn on the obstacle avoidance switch in the remote control.
|
|